Alloy Block Cores

We have a range of high quality radiator, intercooler and oil cooler core blocks available  that you can use to fabricate custom  products. These are designed for you to cut to your particular width requirement.

Radiator Block Cores

High quality core with close fin and tube pitch and extra wide 1 or 2 tubes providing efficient cooling capabilities.

These cores are available in various heights ranging from 160mm through to 864mm and therefore can be used in the custom fabrication of many varied applications.

The core thickness available range from 26mm thick, common in standard road vehicles through to 57mm thick ideal for race and performance applications.

These cores are available in mainly 700mm and 1000mm widths to enable the core to be cut to the exact width required for your custom project.  This provides you with the economic benefit of having the option to fabricate two projects from the one core.

Example of some sizes available -     

Alloy  325x1000x40 5M -  Core 325x1000x40  HDR 1040x62    5mm fins
Alloy  425x1000x42  - Core 425x1000x42       HDR 1040x62 
Alloy  425x700x56 8M -  Core 425x700x56     HDR 740x76 
Alloy  450x700x56  8M  -  Core 450 x700x56  HDR1020x76 TP10mm FH 8mm
Alloy  475x1000x42 – Core 475x1000x42       HDR1040x62
Alloy  550x700x56 8mm – Core 550x700x56  HDR 740x76
Alloy  864x463x57 – Core 864x463x57          HDR  470x62

 

Intercooler and Oil Cooler BP Block Cores

We have a range of heavy duty Bar & Plate alloy brazed intercooler and oil cooler block cores available in a range of heights and thickness. These are ideal for a quick turnaround on a recore of an original intercooler or oil cooler and also ideal for custom fabrication.

Intercooler blocks are available in a height range of 400mm through to 950mm and available in 60mm, 80mm and 100mm thickness depending on block height.

Oil cooler blocks are available in a height range of 180mm through to 900mm and are available in 30mm, 60mm and 80mm thickness depending on block height.

These cores are available in mainly 600mm and 800mm widths to enable the core to be cut to the exact width required for your custom project.  This provides you with the economic benefit of having the option to fabricate two projects from the one core.

 

Note: If you don't have the facility to cut the cores to the size you desire, A1 Automotive Cooling can provide this service.